Ball Joint & Tie Rod End Boots
Price range: $33.00 through $137.50
BAILCAST Ball Joint & Tie Rod End Boots
Universal Fit • Flexible Dust Covers • Four Sizes
Bailcast ball joint boots and tie rod end boots replace split or perished dust covers on compatible joints. Their stretchy material provides a flexible fit and helps protect the joint from dirt and moisture.
If the joint is still serviceable, replacing its damaged boot can avoid the cost of replacing the complete joint. Choose from four sizes to suit your application.
Check the size before ordering. Compare the shaft diameter, joint diameter and boot height with the table below. Select your required size or mixed-pack option from the menu above.
Description
Bailcast Ball Joint Boots and Tie Rod End Boots
Bailcast ball joint boots provide replacement dust covers for compatible suspension ball joints and tie rod ends. Their flexible material helps keep dirt and moisture out while allowing the joint to move.
The range includes four sizes. This gives workshops a practical selection of replacement boots without stocking a separate cover for every vehicle.
Replace the Boot When the Joint Is Still Serviceable
A split or perished dust cover does not always mean the complete joint needs replacement. If the joint remains serviceable, fitting a new boot can be a cost-effective repair.
Check the joint for wear, damage and contamination before fitting a replacement cover. A new boot protects the joint, but it does not repair a worn joint.
Stretchy and Hard-Wearing
These boots use the same high-quality compound as Bailcast’s CV and steering rack boots. The material combines stretch with resistance to demanding conditions.
- Flexible material for a wide range of compatible joints.
- Resistance to oil and grease.
- Resistance to abrasion and grit.
- Resistance to extremes of temperature.
- Resistance to tearing and impact damage.
Ball Joint Boot Size Guide
| Size | Boot code | Shaft diameter | Joint diameter | Boot height |
|---|---|---|---|---|
| Small | B1 | 9–14mm | 23–32mm | 24mm |
| Medium | B3 | 9–14mm | 28–40mm | 26mm |
| Large | B2 | 11–17mm | 35–47mm | 30mm |
| Extra large | B4 | 17–24mm | 39–52mm | 37mm |
Compare all three measurements with the boot you need to replace. Also check the joint shape and retaining positions. Universal fit still requires the correct size for your application.
Mixed Packs for Workshop Use
Mixed packs provide all four sizes, making them useful for workshops that regularly replace dust covers.
- Mixed 8 pack: two boots of each size, retaining O-rings and an Easifit installation tool.
- Mixed 40 pack: ten boots of each size, retaining O-rings and an Easifit installation tool.
Select your preferred option from the product menu. Check the selected option’s pack quantity before ordering.
Fitting Your Replacement Dust Cover
Follow the supplied instructions when removing the old cover and fitting the new boot. Use the correct retaining rings for the selected cover.
The Bailcast Easifit tool helps install the dust cover while reducing the risk of damage. It is included with the mixed packs described above.
For more information, view our ball joint and tie rod end boot guide.
Two-Year Manufacturer’s Warranty
Bailcast ball joint dust covers carry a two-year manufacturer’s warranty against manufacturing defects. The warranty excludes general wear and tear, misuse and consumable items.
Contact the place of purchase to make a claim. You may need to provide proof of purchase.
